MODEL REFERENCE

TP-Link Deco BE5000 V1.60

8 errors · 7 troubleshooting topics · 10 guides

The checks and guides below come from the official manuals for this model.

Find a code or problem on this model

Errors and indicators

Light patterns and messages documented in the manual

Find the indicator lights

Deco BE5000 US V1.60: complete LED status key, rear ports and controls. Both Ethernet sockets share the printed 2.5 Gbps WAN/LAN bracket.

Pulse Yellowdeco is resetting

Deco is resetting.

Solid Yellowdeco is starting up

Deco is starting up.

Pulse Bluedeco is ready for setup

Deco is ready for setup.

Solid Bluedeco is setting up

Deco is setting up.

Pulse Greendeco is upgrading firmware

Deco is upgrading firmware.

Solid Greendeco is all set up and connected

Deco is all set up and connected.

Pulse Redthe satellite Deco is disconnected from the main Deco

The satellite Deco is disconnected from the main Deco.

Solid Reddeco has an issue

Deco has an issue.

Troubleshooting

Find the problem you are experiencing

Main Deco setup: We couldn’t find Deco1 check

Main Deco setup: We couldn’t find Deco: Use TP-Link FAQ 2239 or its main-Deco discovery video, as linked from the official user guide. If the problem persists, contact TP-Link support.

Satellite setup: We couldn’t find another Deco1 check

Satellite setup: We couldn’t find another Deco: Use TP-Link FAQ 1447 or its satellite-Deco discovery video, as linked from the official user guide. If the problem persists, contact TP-Link support.

Setup stuck on Testing Internet Connection1 check

Setup stuck on Testing Internet Connection: Use TP-Link FAQ 2239 or its Testing Internet Connection video linked from the official user guide. If the problem persists, contact TP-Link support.

Wireless devices cannot connect to Deco1 check

Wireless devices cannot connect to Deco: Use TP-Link FAQ 2718, linked from the official user guide. If the problem persists, contact TP-Link support.

Deco suddenly loses internet access1 check

Deco suddenly loses internet access: Use TP-Link FAQ 2428, linked from the official user guide. If the problem persists, contact TP-Link support.

Finding a suitable spot for Deco1 check

Finding a suitable spot for Deco: Use TP-Link FAQ 1446, linked from the official user guide. If the problem persists, contact TP-Link support.

Deco app does not work properly1 check

Deco app does not work properly: Use TP-Link FAQ 1456, linked from the official user guide. If the problem persists, contact TP-Link support.

Guides

Appearance

Instructions from the manual

Reset Deco to factory defaultsView

Press the Reset button for 1 second and release to restore factory default settings. Pulsing yellow changing to solid yellow indicates a successful reset.

Connect a client using the WPS buttonView

Press the WPS button on Deco. Immediately press the WPS button on the client device to start WPS.

Set up your deco

Instructions from the manual

Set up the Deco network23 steps

Download TP-Link Deco from Google Play or the App Store, or scan the manual QR code.
Install it on an Android or iOS smartphone or tablet.
Open the app and log in with a TP-Link ID, or create one first.
If the login password is forgotten, tap Forgot Password? and follow the app to reset it.
Select the Deco model by searching, scanning its product label or selecting from the model list.
If you have more than one model, tap the question below the search box for guidance on maximizing the network.
Scan the product label on Deco for quicker setup and automatic connection to its default Wi-Fi.
Alternatively, follow the steps to set it up manually.
Power off the modem.
Connect Deco to the modem and power both on.
The illustrated connection uses the modem LAN port and either Deco Ethernet port.
Without a modem, connect Deco directly to the Ethernet outlet.
Wait until the Deco LED pulses blue; the phone or tablet then connects automatically to its default Wi-Fi.
Select or customize a location for Deco; the location becomes its name.
Select the internet connection type and enter the information.
Contact the internet service provider if unsure.
Create the Wi-Fi network name and password used to connect devices.
The illustrated password rule requires at least 8 characters and recommends combining letters, numbers and symbols.
Set an automatic update time for the latest firmware.
The illustrated note says that if anyone uses the internet at that time, the update is rescheduled for the next day.
Connect the phone or tablet to the Deco Wi-Fi to continue setup.
Setup is complete.
Connect devices to the network, and add more Decos if any.

Illustrative Deco app model selection: search, scan the product label, or select BE5000. Screens and model lists are examples and may vary.

Fcc compliance information statement

Instructions from the manual

Radio or television interference: FCC notice3 steps

Determine whether the equipment causes interference by switching it off and on.
Try one or more of these measures: reorient or relocate the receiving antenna; increase separation between equipment and receiver; connect the equipment to an outlet on a different circuit from the receiver; consult the dealer or an experienced radio/TV technician.
Unauthorized changes or modifications can void authority to operate the equipment.

Fcc rf radiation exposure statement

Instructions from the manual

US FCC RF separation2 steps

For US FCC mobile configurations, keep at least 20 cm between the transmitter antennas and all persons.
Do not co-locate or operate this device and its antenna with another antenna or transmitter.

Canadian compliance statement

Instructions from the manual

Canadian indoor-band and RF separation notice2 steps

The Canadian notice restricts operation in the 5150–5250 MHz band to indoor use to reduce potential interference to co-channel mobile satellite systems.
For the Canadian IC notice, install and operate with at least 20 cm between the radiator and the body.

Ncc notice & bsmi notice:

Instructions from the manual

Regional NCC radio-interference notice4 steps

The regional NCC notice prohibits unapproved frequency, power or design changes.
Do not interfere with flight safety or lawful communications.
If interference is found, stop using the equipment immediately and correct the interference before resuming.
Accept interference from lawful communications and industrial, scientific and medical radio equipment, and avoid affecting nearby radar systems.

Safety information

Instructions from the manual

Safe operation and when to stop10 steps

Keep Deco away from water, fire, humidity and hot environments.
Do not disassemble, repair or modify it; contact TP-Link for service.
Do not use damaged chargers or USB cables, or chargers other than recommended.
Use only manufacturer-supplied power supplies from the original package; contact TP-Link with questions.
Do not use the device where wireless devices are prohibited.
Install its adapter near the equipment and keep it easily accessible.
Operate at 0–40°C (32–104°F).
Keep the product and its power adapter more than 15 cm (6 inches) from pacemakers and other implanted medical devices.
If interference is suspected, turn it off and consult a physician for information specific to the implanted device.
Read and follow the safety information and handle the product carefully; improper use can cause accidents or damage.

安全諮詢及注意事項

Instructions from the manual

Regional safety notice: cleaning and ventilation7 steps

The Chinese-language regional safety notice says to use the original power supply or the power type specified for the product.
Disconnect power before cleaning.
Do not clean with liquids, sprays or a wet cloth.
Keep moisture and liquids away.
Do not block or cover the ventilation openings.
Keep it away from heat sources and do not place it in an enclosed location without normal ventilation.
Do not open the case or repair it yourself; contact the manufacturer or agent if it fails.

Recycling

Instructions from the manual

Recycle electrical and electronic equipment2 steps

The crossed-out wheeled-bin marking identifies WEEE collection.
Give the product to a competent recycling organization or to a retailer when buying new electrical or electronic equipment.

Model details

Model and compatibility

Ports and controls: Two 2.5 Gbps WAN/LAN ports, WPS button, Reset button, power slot and status LED.
Operating temperature: 0–40°C (32–104°F).

Before setup

Remain online using Wi-Fi or mobile data during app download and login.

Errors and indicators

Troubleshooting

Guides

Appearance

Set up your deco

Fcc compliance information statement

Fcc rf radiation exposure statement

Canadian compliance statement

Ncc notice & bsmi notice:

Safety information

安全諮詢及注意事項

Recycling

Model details

Model and compatibility

Before setup

Related reviewed instructions

Manuals and sources