MODEL REFERENCE

Magnasonic FS50

12 troubleshooting topics · 16 guides

Magnasonic FS50

The checks and guides below come from the official manuals for this model.

Troubleshooting

Find the problem you are experiencing
Get the best scan quality2 checks
Film/slide cleanliness
Ensure film/slides are clean.
Scanner cleanliness
Immediately before scanning, clean inside with the included brush using the Cleaning and Care instructions.
A consistent spot appears on every scanned slide1 check
Possible internal dust
Use the included brush to remove foreign debris; follow Cleaning and Care.
Scan without a computer1 check
Computer availability
Scan without a computer to an SD card up to 128 GB or 128 MB internal memory; export to a computer later.
Saved image file format1 check
File format question
Images save automatically as JPG files.
The scanner screen is black but has power2 checks
TV Out connection
Ensure the TV Out cable is disconnected from the scanner rear.
USB power source
Verify a 5 V 1 A USB power source and test a different USB power source.
The TV image is black and white1 check
TV input compatibility
Connect TV Out to a yellow RCA input. If using a Component input, a TV setting may need changing for RCA compatibility.
Not all images appear on the computer1 check
Inserted SD card
With an SD card inserted, the computer sees only its images. Remove the card to view internal-storage images.
TV Out image does not appear on the TV1 check
TV signal format
The FS50uses NTSC video output. If the TV requires PAL, disconnect TV Out, select TV Out in Main Menu and choose PAL.
Recycle old slides, negatives and film1 check
Film/photo chemicals
Old film/photos may contain chemicals that make recycling difficult. Consult the local recycling company for disposal/recycling instructions.
Scanned slide or negative colors are faded1 check
Age and cleanliness
Slides/negatives can degrade and fade over time. Ensure they are clean and use scan color-adjustment options.
Scanned colors are reversed or negative1 check
Film-type selection
Change the menu film type to Negative.
Raw film versus developed negatives1 check
Development requirement
Use developed film only.

Guides

Powering on your film scanner

Instructions from the manual
Power the scanner4 steps
  1. Connect the miniUSB end of the included miniUSB-to-USB cable to the scanner miniUSB port.
  2. Connect the other end to a USB wall adapter (not included) or USB power source rated 5 V 1 A.
  3. Hold Power to turn the scanner on.
  4. It shuts off automatically after 10 minutes of inactivity.

Changing the language

Instructions from the manual
Change the menu language3 steps
  1. In Main Menu select LANGUAGE and press OK.
  2. Use the left/right arrows to choose English, Spanish, French, German, Italian, Japanese, Simplified Chinese or Traditional Chinese.
  3. Press OK to confirm.

Prepping your film/slides

Instructions from the manual
Prepare film and slide adapters5 steps
  1. Ensure slides/film are clean and free of dirt/debris.
  2. Open the appropriate labelled slide/film adapter and insert the film/slide.
  3. Use the manual’s film/slide identification figures if unsure of the type.
  4. Ensure the film/slide faces the correct direction and is not bent.
  5. Close the adapter and press its edges until locked.

Preparing the film scanner

Instructions from the manual
Prepare the film scanner6 steps
  1. Hold Power to turn the scanner on.
  2. Insert the prepared adapter into the scanner right-side slot.
  3. In Main Menu, use the arrows to highlight FILM TYPE and press OK.
  4. Use the right arrow to cycle through Negatives, Slides or B&W; press OK to confirm.
  5. At the size screen, use the right arrow to choose the correct size and press OK.
  6. Original film/slide quality affects scanned image quality.

Cleaning and care

Instructions from the manual
Clean the lens with the included brush3 steps
  1. Use the included cleaning brush to remove lens dust/debris.
  2. Insert its soft end face down into the film/slide holder slot.
  3. Carefully move the brush inside to remove dust or debris on the lens.
Insert only the included cleaning brush,soft end face down,into the film/slide holder slot.
Insert only the included cleaning brush,soft end face down,into the film/slide holder slot.

Diagram key

  • brush: Included cleaning brush; insert its soft end face down and carefully move it inside to remove lens dust or debris.
  • left-pointing insertion arrow: Insert the brush into the film/slide holder slot in the direction shown.

Using an sd card

Instructions from the manual
Insert and remove an SD card4 steps
  1. The scanner has 128 MB built-in memory and accepts SD cards up to 128 GB.
  2. A 128 GB card may require formatting before first use.
  3. Insert the SD card label down into the rear SD slot until it clicks.
  4. To remove it, press until it clicks and pops out, then remove it.

Formatting your sd card

Instructions from the manual
Format an SD card4 steps
  1. Warning: formatting deletes all files on the SD card.
  2. Download them to your computer first.
  3. In Main Menu select FORMAT and press OK.
  4. At the prompt, use the left arrow to choose Yes and press OK to start formatting.

Scanning your images

Instructions from the manual
Scan film and slides12 steps
  1. Press SCAN to select Capture mode and press OK.
  2. The film/slide image appears with its type at lower left.
  3. The screen image does not represent final scanned quality.
  4. For Brightness or Color, press OK.
  5. Use left/right arrows to select EV, Red (R), Green (G)or Blue (B); press OK to adjust each individually.
  6. When settings are correct, press SCAN to return.
  7. Before scanning, use the left arrow to mirror or right arrow to flip the image.
  8. When ready, press SCAN then OK to capture/save to internal memory or an inserted SD card.
  9. The FS50 cannot scan directly to a computer.
  10. Multiple slides/negatives can be pushed/pulled through the adapter without removing it.
  11. Handle strips carefully to avoid bending or damage.
  12. When done, press MENU twice to return to Main Menu.
Push or pull multiple slides/negatives through the adapter without removing it; avoid bending or damaging strips.
Push or pull multiple slides/negatives through the adapter without removing it; avoid bending or damaging strips.

Diagram key

  • left outward arrow: Film/negatives may be pulled through the adapter without removing it.
  • right inward arrow: Film/negatives may be pushed through the adapter without removing it.
  • film/negative strip: Handle strips cautiously to avoid bending or damage.

Viewing your scanned images

Instructions from the manual
View saved images5 steps
  1. In Main Menu select GALLERY and press OK.
  2. Saved images play automatically as a slideshow.
  3. Press OK to stop the slideshow and review manually.
  4. Use left/right buttons to browse saved images.
  5. Press OK again for Gallery options: resume slideshow, delete the image or return to Main Menu.

Transferring images to your computer

Instructions from the manual
Transfer saved images to a computer6 steps
  1. Important: scan on the FS50first; direct scanning to a computer is unsupported.
  2. Ensure the computer is on.
  3. Connect the scanner to the computer using the included USB cable.
  4. Turn the scanner on.
  5. Select USB MSDC in its menu.
  6. A new folder appears on the computer with saved images; move them from the scanner to the computer.

Watching saved images from a tv screen

Instructions from the manual
Watch saved images on a TV6 steps
  1. Turn the scanner on.
  2. Connect the included TV Out cable to the scanner rear TV Out port.
  3. Connect the other end to the TV video input.
  4. The scanner LCD turns off automatically when connected to a TV.
  5. Select the correct TV input/video source.
  6. The scanner screen should now appear on the TV.

Safety alerts

Instructions from the manual
Stop for unsafe or abnormal operationView
Stop immediately, unplug the power cord and seek a qualified service professional for smoke/unusual smell; rain, water or liquid exposure; failure to operate normally despite following instructions; a distinct performance change; or any dropping/damage.

Best practices for safe use

Instructions from the manual
Use the scanner safely8 steps
  1. Use only standard-size film and manufacturer-specified attachments/accessories.
  2. Straighten/unwind the USB cord before use.
  3. Confirm rating-label voltage matches local electricity supply.
  4. Unplug the adapter for extended nonuse and thunderstorms.
  5. Keep away from water; do not immerse the product, cord or accessories in any liquid.
  6. Do not obstruct ventilation; install according to manufacturer instructions.
  7. Keep away from radiators, heat registers, stoves, amplifiers and other heat sources.
  8. Do not service/disassemble the product yourself; opening covers may expose dangerous voltages or other hazards.

Maintenance

Instructions from the manual
Maintain the scanner safely4 steps
  1. Ensure the scanner is clean before use.
  2. Do not use liquid cleaners; wipe the outside only with a dry cloth.
  3. Clean the inside only with the included brush.
  4. Insert its soft end into the film/slide holder slot and carefully move it inside to remove lens dust/debris.

Fcc information

Instructions from the manual
Resolve radio interference and rare lockup2 steps
  1. For harmful radio/TV interference, try reorienting/relocating the receiving antenna, increasing equipment/receiver separation, connecting to a different circuit than the receiver, or consulting the dealer or an experienced radio/TV technician.
  2. For rare lockup from severe interference, external noise or static electricity, turn the unit off, wait at least 5 seconds, and turn it on again.

Magnasonic® warranty

Instructions from the manual
Arrange manufacturer warranty service11 steps
  1. The manual provides a one-year parts and labour warranty against material and workmanship defects.
  2. Proof of purchase from an authorized dealer is required.
  3. For covered defects, the manufacturer repairs free; if repair is impossible, it replaces the product.
  4. Discontinued products are replaced by the newest version or current equivalent.
  5. Replacement parts remain covered for the unexpired original warranty term.
  6. Exclusions cover abusive operation, negligence, accident, improper installation or use; unauthorized tampering, modification, adjustment or repair; cosmetic wear or damage; external or environmental damage including voltage or liquid; missing model, serial or certification markings; rental or commercial use; installation, setup or programming charges; and incorrect supply voltage.
  7. Use voltage converters where applicable.
  8. For a covered defect, deliver the product with proof of purchase.
  9. Ship prepaid in its original container or equivalent; the customer bears transit loss or damage risk.
  10. The manufacturer covers applicable parts, labour and return costs.
  11. Seek help through its support page.

Controls and parts

See the manual diagrams 1 diagram
FS50 front controls and rear card,power and TV ports. Applies to the 24MP version documented by User Manual v2.3.
FS50 front controls and rear card,power and TV ports. Applies to the 24MP version documented by User Manual v2.3.

Model details

Model and compatibility

Resolution
16 MP native; 24 MP interpolated. [1]
Storage
128 MB internal memory; SD card up to 128 GB. [1]
Power
DC 5 V 1 A; USB wall adapter is not included. [1]
Dimensions
4.0 × 3.4 × 3.4 inches (101.6 × 86.4 × 86.4 mm). [1]
Weight
0.66 lb (0.30 kg). [1]

Manuals and sources

  1. Magnasonic operation manual
  2. Magnasonic model support and details
ManualGrid

Manuals, error messages and practical checks for the products you own.

An independent reference. Product names and trademarks belong to their respective owners.