MODEL REFERENCE

TP-Link Deco BE68 V1.60

8 errors · 7 troubleshooting topics · 10 guides

The checks and guides below come from the official manuals for this model.

Find a code or problem on this model

Errors and indicators

Light patterns and messages documented in the manual

Find the indicator lights

Deco BE68 US V1.60: complete LED status key and rear controls. Port speeds are grouped as printed; use the port markings to identify individual sockets.

Pulse Yellowdeco is resetting

Deco is resetting.

Solid Yellowdeco is starting up

Deco is starting up.

Pulse Bluedeco is ready for setup

Deco is ready for setup.

Solid Bluedeco is setting up

Deco is setting up.

Pulse Greendeco is upgrading firmware

Deco is upgrading firmware.

Solid Greendeco is all set up and connected

Deco is all set up and connected.

Pulse Redthe satellite Deco is disconnected from the main Deco

The satellite Deco is disconnected from the main Deco.

Solid Reddeco has an issue

Deco has an issue.

Troubleshooting

Find the problem you are experiencing

Main Deco setup: We couldn’t find Deco1 check

Main Deco setup: We couldn’t find Deco: Use TP-Link FAQ 2239 or its main-Deco discovery video, as linked from the official user guide. If the problem persists, contact TP-Link support.

Satellite setup: We couldn’t find another Deco1 check

Satellite setup: We couldn’t find another Deco: Use TP-Link FAQ 1447 or its satellite-Deco discovery video, as linked from the official user guide. If the problem persists, contact TP-Link support.

Setup stuck on Testing Internet Connection1 check

Setup stuck on Testing Internet Connection: Use TP-Link FAQ 2239 or its Testing Internet Connection video linked from the official user guide. If the problem persists, contact TP-Link support.

Wireless devices cannot connect to Deco1 check

Wireless devices cannot connect to Deco: Use TP-Link FAQ 2718, linked from the official user guide. If the problem persists, contact TP-Link support.

Deco suddenly loses internet access1 check

Deco suddenly loses internet access: Use TP-Link FAQ 2428, linked from the official user guide. If the problem persists, contact TP-Link support.

Finding a suitable spot for Deco1 check

Finding a suitable spot for Deco: Use TP-Link FAQ 1446, linked from the official user guide. If the problem persists, contact TP-Link support.

Deco app does not work properly1 check

Deco app does not work properly: Use TP-Link FAQ 1456, linked from the official user guide. If the problem persists, contact TP-Link support.

Guides

Appearance

Instructions from the manual

Reset Deco to factory defaultsView

Press the Reset button for 1 second and release to restore factory default settings. Pulsing yellow changing to solid yellow indicates a successful reset.

Connect a client using the WPS buttonView

Press the WPS button on Deco. Immediately press the WPS button on the client device to start WPS.

Connect USB storageView

Connect a USB storage device to the USB 3.0 port.

Set up your deco

Instructions from the manual

Set up the Deco network21 steps

Download TP-Link Deco from Google Play or the App Store, or scan the manual QR code.
Install it on an Android or iOS smartphone or tablet.
Open the app and log in with a TP-Link ID, or create one first.
If the login password is forgotten, tap Forgot Password? and follow the app to reset it.
Tap + at the top right of the homepage and select Create a Network.
Plug in Deco and wait until its LED pulses blue; the phone or tablet connects automatically.
Bluetooth can be enabled on the phone or tablet beforehand for quicker setup.
Power off the modem.
Connect Deco to the modem and power the modem on.
The illustrated instruction requires restarting the modem by turning it off and on.
Without a modem, connect Deco directly to the Ethernet outlet; the illustrated alternative also names a network-providing router or switch LAN port.
Select or customize a location for Deco; the location becomes its name.
Select the internet connection type and enter the information.
Contact the internet service provider if unsure.
Create the Wi-Fi network name and password used to connect devices.
The illustrated password rule requires at least 8 characters and recommends combining letters, numbers and symbols.
Create the separate 6 GHz Wi-Fi network name and password used to connect devices to that network; its illustrated password minimum is also 8 characters.
Set an automatic update time for the latest firmware.
The illustrated note says that if anyone uses the internet at that time, the update is rescheduled for the next day.
Setup is complete.
Connect devices to the Deco network and add further Deco units, if any, to extend it.

Modem connection alternative: connect by Ethernet with the modem switched off, then restart the modem.

No-modem alternative: connect to a network-providing LAN port or internet outlet.

Fcc compliance information statement

Instructions from the manual

Radio or television interference: FCC notice3 steps

Determine whether the equipment causes interference by switching it off and on.
Try one or more of these measures: reorient or relocate the receiving antenna; increase separation between equipment and receiver; connect the equipment to an outlet on a different circuit from the receiver; consult the dealer or an experienced radio/TV technician.
Unauthorized changes or modifications can void authority to operate the equipment.

Fcc rf radiation exposure statement

Instructions from the manual

FCC indoor placement and RF separation5 steps

Keep at least 20 cm between the transmitter antennas and all persons.
Do not co-locate or operate this device and its antenna with another antenna or transmitter.
Use indoors only.
Operation is prohibited on oil platforms, cars, trains, boats and aircraft, except on large aircraft flying above 10,000 feet in the 5.925–6.425 GHz band.
Do not use 5.925–7.125 GHz transmitters to control or communicate with unmanned aircraft systems.

Safety information

Instructions from the manual

Safe operation and when to stop10 steps

Keep Deco away from water, fire, humidity and hot environments.
Do not disassemble, repair or modify it; contact TP-Link for service.
Do not use damaged chargers or USB cables, or chargers other than recommended.
Use only manufacturer-supplied power supplies from the original package; contact TP-Link with questions.
Do not use the device where wireless devices are prohibited.
Install its adapter near the equipment and keep it easily accessible.
Operate at 0–40°C (32–104°F).
Keep the product and its power adapter more than 15 cm (6 inches) from pacemakers and other implanted medical devices.
If interference is suspected, turn it off and consult a physician for information specific to the implanted device.
Read and follow the safety information and handle the product carefully; improper use can cause accidents or damage.

Recycling

Instructions from the manual

Recycle electrical and electronic equipment2 steps

The crossed-out wheeled-bin marking identifies WEEE collection.
Give the product to a competent recycling organization or to a retailer when buying new electrical or electronic equipment.

Getting started

Instructions from the manual

Stay online during app setupView

Remain online using Wi-Fi or mobile data throughout the app download and login steps. Download TP-Link Deco for iOS or Android and follow the app through setup.

English: safety information

Instructions from the manual

Indoor Deco power and service precautions8 steps

Keep the device away from fire and hot environments.
Do not disassemble, repair or modify it; contact TP-Link for service.
Do not use it where wireless devices are prohibited.
Do not use damaged chargers or USB cables, or chargers other than recommended.
Install the power adapter or power-supply cord plug near the equipment and keep it easily accessible.
Use only manufacturer-provided power supplies from the original packaging; consult the model user manual for the applicable supply and contact TP-Link with questions.
For products powered by a power-supply cord with a three-pin plug, use a wall outlet with an earthing connection.
Read and follow the safety information, use the product carefully and recognize that improper use can cause accidents or damage.

Model details

Model and compatibility

Ports and controls: One Gigabit, one 2.5 Gbps and one 10 Gbps WAN/LAN port; USB 3.0 port, WPS button, Reset button, power slot and status LED.
Operating temperature: 0–40°C (32–104°F).

Errors and indicators

Troubleshooting

Guides

Appearance

Set up your deco

Fcc compliance information statement

Fcc rf radiation exposure statement

Safety information

Recycling

Getting started

English: safety information

Model details

Model and compatibility

Related reviewed instructions

Manuals and sources